Stationary compressors Dali DN, DL, EN, EN II, ED, etc.

Screw compressors with receiver

DN - screw compressors with a low-capacity receiver.

DLYT-3.6/7, DL-6.0/8GS, DL-5.0/8RS, DN-7,5-8 - screw compressors with a receiver of average performance.

The presence of a receiver ensures the creation of a supply of compressed air to compensate for consumption peaks, suppression of pressure pulsation, cooling of compressed air, removal of condensate from compressed air. The presence of wheels provides ease of movement; screw compressors have a simple design, they are much more reliable than their piston counterparts. Switching to their use is economically more profitable.

• DN. Technical description
• DLYT-3.6/7, DL-6.0/8GS, DL-5.0/8RS, DN-7.5-8. Technical Description

Two-stage screw compressors

EN-II - the most modern energy-saving compressors with a capacity from 13.5 to 65.8 ^m3 with a two-stage air compression system, which reduces energy consumption, makes it possible to use them in any production processes, including continuous compressed air supply.

• EN-II. Technical description

Screw air compressors

DL-RA, DL-GA - oil-filled screw air compressors operate in automatic mode, are installed without a foundation near compressed air consumers, which reduces pressure in pipelines and electricity consumption. A two-stage oil separation system provides a residual oil content of 1-3 mg/^m3 in compressed air.

• DL-RA, DL-GA. Technical description

Water-cooled screw compressors

DL-S, DL-GS - screw electric compressors with water cooling. The water cooling system consists of a compressed air cooler and a lubricant cooler, they have the same tubular design. Cool the air and grease with running water. A fan is installed inside the water-cooled screw electric compressor to remove warm air outside.

• DL-S, DL-GS. Technical description

Screw compressors with frequency converter

DL-F are standard compressors with a frequency converter. The design provides an economical mode of operation of products by adjusting the voltage and speed of the electric motor. The compressors are designed for use in a non-constant mode of demand for compressed air.

The converter regulates the rotation speed of the electric motor, this allows you to consume electricity only for the production of the required amount of compressed air.

• DL-F. Technical description

Energy-saving screw compressors

ED - energy-saving industrial screw compressors allow you to save energy both due to the installed low-voltage three-phase electric motor of the 2nd class of energy saving, and due to the unique patented design feature of the compressor. Energy saving of 7-10%. They have a high operational life, reduced noise due to the design features of the screw pair and the centrifugal fan.

• ED. Technical Description

High pressure screw compressors

DLCY and ED series.

• the two-stage screw block of the SKY 2 series is patented;
• designed for a maximum pressure of 40 bar;
• two-stage compression;
• SKF bearings, direct drive, no gear noise;
• optimal design, the ability to work in two modes;
• there are two types of compressors on sale: electric and diesel.

• High-pressure screw compressors. Technical description

Low pressure screw compressors

EN is a special project for energy saving compressors at an outlet pressure of 3 or 5 MPa. They are used in the textile, glass, cement and chemical industries, in water treatment systems and in painting. Energy-efficient (up to 30%). Capacity 6.55-92.04 ^m3.

• Low-pressure screw compressors. Technical description

Price list

Catalog